Kia 0K23N2638Z Rear Brake Shoe Set

Also, the brake shoes' replacement should include sothat the tension's loss due to continuous heating and cooling cycles does not occur. First, loosen rear wheel lug nuts, raise the rear of the vehicle on jackstands and remove the rear wheels while ensuring that parking brake is released. Remove the brake drum followed by if necessary, removal of the rear hub and wheel bearing assembly. Clean your brake unit; then compress the shoe retainer spring and follow specific steps that will be used to remove and replace shoes while ensuring correct lubrication and adjustment. If there are any damaged or worn drums, reface them. Reinstall hub & wheel bearing assembly in case it was removed; install brake drum; attach wheels; lower vehicle; adjust brakes. The other category is parking brakes that requires all four to be done at once but only one side at a time . For this part, loosen rear wheel lug nuts, raise the car back on jacks then remove rear wheels being careful with releasing handbrake even . Inspect shoe lining after which you can clean up all these brake parts by removing hub and bearing for instance in some cases . Using more detailed processes means replacing a parking Brake shoe also involves lubricating it as well as adjusting it . Repeat procedure for other side of car before puttingdown remaining two tyres backand adjusting handbrake lever.

1. Loosen rear wheel lug nuts. 2. Raise the rear of the vehicle on jackstands. 3. Remove the rear wheels. 4. Release the parking brake. 5. Inspect the shoe lining. 6. Remove the hub and bearing assembly if desired. 7. Wash the brake parts. 8. Follow detailed steps to replace the parking brake shoes, lubricate, and adjust them. 9. Repeat the procedure for the other side. 10. Install the rear wheels. 11. Adjust the parking brake lever.