How to disconnect the Instrument Cluster from a 2014 Kia Sedona?

Disconnect the cable from the negative battery terminal. This procedure can be challenging for the home mechanic due to hidden fasteners, difficult angles, and numerous electrical connectors that need to be tagged and disconnected. It is advisable for only experienced do-it-yourselfers to attempt this task. During the removal of the instrument panel, make careful notes on how each piece is removed, its placement in relation to other components, and how it is secured. Noting the installation of each part beforehand will facilitate reassembly. The instrument panel is attached to the instrument panel cross bar, which must be removed to access all fasteners. Remove the steering wheel and column as a unit, all dashboard trim panels and glove boxes, the air conditioning and heater control assembly, the instrument cluster, radio, instrument panel speakers, and DVD player if equipped, and the front seats for easier access. Also, remove the center floor console, shifter knob, and disconnect the shift cable. Disconnect the wiring harnesses at each A-pillar and remove the retaining bolts and nuts from the front and sides of the instrument panel, noting that approximately 20 fasteners secure it to the cross bar. Disconnect the passenger's side air bag electrical connector and the mounting bolt, then, with assistance, carefully separate and remove the instrument panel from the vehicle. For the instrument panel cross bar, disconnect the electrical connectors to the supplemental restraint system control module, the A/C and heating wiring harness, and remove the bolts securing the A/C and heating housing to the cross bar. Disconnect the antenna harness, main vehicle harnesses, ground wire, and data link connector from the instrument panel. Remove the hood release cable handle and the cross bar mounting bolts and nuts. The cross bar is heavy, so have an assistant support it during removal and installation. Finally, with assistance, remove the instrument panel from the vehicle, and reinstallation follows the reverse order of removal.

Genuine 2014 Kia Sedona Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Instrument Clusters found

View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940114D080
$499.51 MSRP: $736.73
You Save: $237.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument(Kilometer Per Hour); Cluster Assembly, Instrument Cluster
- Part Code: 94002G
- Item Weight: 3.40 Pounds
- Item Dimensions: 16.3 x 8.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940114D080
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.5L - Lambda 2 | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D320
$535.19 MSRP: $789.37
You Save: $254.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
- Part Code: 94002G
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D320
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D310
$540.94 MSRP: $773.88
You Save: $232.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
- Part Code: 94002G
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D310
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D326
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
- Part Code: 94002G
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D326
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D316
$504.88 MSRP: $722.28
You Save: $217.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
- Part Code: 94002G
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D316
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D327
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Instrument Cluster
- Part Code: 94002G
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D327
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940114D100
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument(Kilometer Per Hour); Instrument Cluster
- Part Code: 94002B
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940114D100
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.5L - Lambda 2 | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D827
$990.93 MSRP: $1417.63
You Save: $426.70 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
- Part Code: 94002G
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D827
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940014D317
$504.88 MSRP: $722.28
You Save: $217.40 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
- Part Code: 94002G
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940014D317
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
2014 Kia Sedona Instrument Cluster Assembly
Part Number: 940114D620
$489.71 MSRP: $722.28
You Save: $232.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument(Kilometer Per Hour); Instrument Cluster
- Part Code: 94002B
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 940114D620
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
More Info
Fits the following 2014 Kia Sedona Submodels:
- 3.5L - Lambda 2 | Wagon Long - 7P, Wagon Short - 7P

2014 Kia Sedona Instrument Cluster

Look no further for OEM 2014 Kia Sedona Instrument Cluster. Our website stocks an extensive selection, all priced competitively. You can rest assured that all of our genuine 2014 Kia Sedona Instrument Cluster are backed by a manufacturer's warranty and guaranteed quality. With our hassle-free return policy and speedy delivery, your shopping experience is set to be smooth and efficient.

2014 Kia Sedona Instrument Cluster Parts Questions & Experts Answers

Q: How to disconnect the Instrument Cluster from a 2014 Kia Sedona?
A: Disconnect the cable from the negative battery terminal. This procedure can be challenging for the home mechanic due to hidden fasteners, difficult angles, and numerous electrical connectors that need to be tagged and disconnected. It is advisable for only experienced do-it-yourselfers to attempt this task. During the removal of the instrument panel, make careful notes on how each piece is removed, its placement in relation to other components, and how it is secured. Noting the installation of each part beforehand will facilitate reassembly. The instrument panel is attached to the instrument panel cross bar, which must be removed to access all fasteners. Remove the steering wheel and column as a unit, all dashboard trim panels and glove boxes, the air conditioning and heater control assembly, the instrument cluster, radio, instrument panel speakers, and DVD player if equipped, and the front seats for easier access. Also, remove the center floor console, shifter knob, and disconnect the shift cable. Disconnect the wiring harnesses at each A-pillar and remove the retaining bolts and nuts from the front and sides of the instrument panel, noting that approximately 20 fasteners secure it to the cross bar. Disconnect the passenger's side air bag electrical connector and the mounting bolt, then, with assistance, carefully separate and remove the instrument panel from the vehicle. For the instrument panel cross bar, disconnect the electrical connectors to the supplemental restraint system control module, the A/C and heating wiring harness, and remove the bolts securing the A/C and heating housing to the cross bar. Disconnect the antenna harness, main vehicle harnesses, ground wire, and data link connector from the instrument panel. Remove the hood release cable handle and the cross bar mounting bolts and nuts. The cross bar is heavy, so have an assistant support it during removal and installation. Finally, with assistance, remove the instrument panel from the vehicle, and reinstallation follows the reverse order of removal.

Related 2014 Kia Sedona Parts

Alternate Year Models

2013 Kia Sedona Instrument Cluster 2015 Kia Sedona Instrument Cluster