To remove the outside mirror, you, however, have to unclip the interior sail panel from the corner of the door gently. If the vehicle has power mirrors, pull out or remove the door trim panel, use a needly screwdriver to detach the electrical connectors and unhook the harness retainer of the mirror. Subsequently, disconnect the mirror mounting bolt and take out the mirror, and vice versa for assembling the parts. As for the inside mirror, if configured, to remove it, the electric connector must be disconnected at the back side of the mirror, then the set screw located at the back of the mirror is slided up using a Phillips head screwdriver and after that the inside mirror can be released by shifting it up off the button on the windshield. If the mount plate will no longer stick to the windshield: adhesive kits are available at auto parts stores for this purpose and the usage is explained in manuals. Removing entails holing of ways while installation is the reverse of removal.