My Garage
Cart

Genuine Kia Sedona Fuel Level Sensor

Gas Gauge Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Level Sensors found

  • Kia Sedona Fuel Level Sensor - 0K52Z60960
    Diagram for Kia Sedona Fuel Level Sensor - 0K52Z60960
    View related parts

    Kia Sedona Fuel Tank Gauge

    Part Number: 0K52Z60960
    $151.05 MSRP: $219.87
    You Save: $68.82 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Gauge-Fuel Tank; Fuel Gauge Sending Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
  • Kia Sedona Fuel Level Sensor - 944604D500
    Diagram for Kia Sedona Fuel Level Sensor - 944604D500
    View related parts

    Kia Sedona Fuel Pump Sender Assembly

    Part Number: 944604D500
    $133.99 MSRP: $195.03
    You Save: $61.04 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sender Assembly-Fuel Pump; Fuel Gauge Sending Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
  • Kia Sedona Fuel Level Sensor - 944604D700
    Diagram for Kia Sedona Fuel Level Sensor - 944604D700
    View related parts

    Kia Sedona Fuel Pump Sender Assembly

    Part Number: 944604D700
    $129.51 MSRP: $188.52
    You Save: $59.01 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sender Assembly-Fuel Pump; Fuel Gauge Sending Unit, Fuel Sender Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2006-2014 Kia Sedona | 3.5L - Lambda 2 | Wagon Long - 7P, Wagon Short - 7P
  • Kia Sedona Fuel Level Sensor - 94460A9000
    Diagram for Kia Sedona Fuel Level Sensor - 94460A9000
    View related parts

    Kia Sedona Fuel Pump Sender Assembly

    Part Number: 94460A9000
    $131.76 MSRP: $191.78
    You Save: $60.02 (32%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sender Assembly-Fuel Pump; Fuel Gauge Sending Unit, Fuel Sender Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
  • Diagram for Kia Sedona Fuel Level Sensor - 0K54C60960
    View related parts
    Product Specifications
    • Other Name: Gauge-Fuel Tank; Fuel Gauge Sending Unit, Sending Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
  • Kia Sedona Fuel Level Sensor - 0K52Y60960
    Diagram for Kia Sedona Fuel Level Sensor - 0K52Y60960
    View related parts
    Product Specifications
    • Other Name: Gauge-Fuel Tank; Fuel Gauge Sending Unit, Sending Unit
    • Warranty: This genuine part is guaranteed by Kia's factory warranty.
    Fits the following Vehicles:
    • 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7

Kia Sedona Fuel Level Sensor

The Kia Sedona Fuel Level Sensor provides a real-time view for drivers, letting them know how much gas is left and preventing any surprise stalls while encouraging timely refills. Sitting in the tank along with the pump is this Fuel Level Sensor, which combines a buoyant float, a hinged rod, and a variable resistor that changes electrical output based on whether fuel is moving up or down, and then sends that signal right to the dashboard, to your gauge. Earlier versions of the Sedona had the same basic float-resistor principle but with simpler contact points, and later Kia versions have fully sealed electronic resistors that resist higher heat and have less signal lag, meaning that readings stabilize faster after a fill-up. Regardless of year, each Sedona has one Fuel Level Sensor for the main tank whose accuracy keeps the gauge from being pegged at full or dropping suddenly. In the current Kia Sedona lineup, the Fuel Level Sensor continues to work under hot summer road trips and quick station top-offs. If the Fuel Level Sensor gets stuck or the resistor gets worn, the gauge incorrectly tells you that there is more fuel in the tank than there actually is, and the driver can miss the low fuel indication, highlighting how important this little piece of equipment is in every Kia people mover.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Fuel Level Sensor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Fuel Level Sensor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Fuel Level Sensor Parts Questions & Experts Answers

  • Q: How do you relieve the fuel system pressure and remove the fuel pump and Fuel Level Sensor from the Kia Sedona?
    A:
    Relieve the fuel system pressure and remove the fuel filler cap. Disconnect the cable from the negative battery terminal. Remove the left-side second row rear seat, then pull the carpet back. On 2005 and earlier models, it isn't necessary to remove the seat. Remove the fuel pump/Fuel Level Sensor floor service hole cover by taking out the screws and lifting up the fuel pump access cover. Disconnect the fuel pump electrical connectors and the fuel lines from the top of the fuel pump unit. Remove the sound insulator, if equipped, and mark the fuel pump orientation for reference when installing. On 2005 and earlier models, remove the fuel pump mounting screws. For 2006 and later models, use special service tool 09310-2B200 (or equivalent) to rotate the lock ring counterclockwise and remove it; alternatively, a punch can be used to drive the lock ring in a counterclockwise direction. Carefully lift the fuel pump/Fuel Level Sensor assembly from the Fuel Tank. Installation is the reverse of removal.

Related Kia Sedona Parts