How to disconnect and remove the throttle body on Kia Sedona?

Disconnect the cable from the negative battery terminal. Remove the air intake duct. For 2005 and earlier models, disconnect the electrical connectors from the Throttle Position Sensor (TPS) and Idle Speed Control (ISC) motor. For 2006 and later models, disconnect the wiring from the throttle control motor by removing the throttle body-to-support bracket bolt, followed by the throttle body mounting bolts. If applicable, disconnect the vacuum hoses from the throttle body and clamp off the coolant hoses to minimize coolant loss. Remove the throttle body mounting fasteners and take off the throttle body, ensuring to remove the throttle body support bracket bolt at the base for 2006 and later models. Disconnect the coolant hoses from the throttle body, pinching off the two hoses prior to detaching them to avoid spillage. Remove and discard the old throttle body gasket, then clean the gasket mating surfaces. Installation is the reverse of removal; use a new gasket and tighten the throttle body mounting bolts to the specified torque, checking the coolant level and adding as necessary.

Genuine Kia Sedona Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Kia Sedona Etc-Actuator
Part Number: 351003CAA0
$386.18 MSRP: $565.58
You Save: $179.40 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2018 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Etc-Actuator
Part Number: 351003C700
$341.82 MSRP: $500.62
You Save: $158.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Etc-Actuator
Part Number: 351003C200
$421.72 MSRP: $617.63
You Save: $195.91 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Throttle Body Assembly
Part Number: 3510039610
Product Specifications
- Other Name: Body Assembly-Throttle; Throttle Body
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7

Kia Sedona Throttle Body

Kia Sedona Throttle Body controls the right quantity of air intake into the engine that maintains a healthy balance in the supply of fuel to provide smooth and reliable power. It is located between the air cleaner and the intake manifold and pivots a butterfly plate whenever the driver presses the accelerator, with sensor data being fed to the powertrain computer to match fuel flow. The cable-operated Throttle Body in early Sedona models was named Throttle Body injection and comprised one or two injectors housed in the same cavity to make a cost-effective leap out of carburetors. Subsequent Kia releases provided the Sedona with a larger Throttle Body to provide stronger midrange pull. More recent Kia models have changed to multi-port injection and an electronic Throttle Body that operates with drive-by-wire controls and replaces mechanical connections with an electric motor that reacts more quickly and connects to traction systems. Both types have Idle Air Control passages and throttle position sensor, but the electronic style provides smoother idle, more stable idle, and less wear on the linkages. Periodic check-ups will assist owners of Kia Sedona in identifying problems at an early stage.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Throttle Body, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Throttle Body, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Throttle Body Parts Questions & Experts Answers

Etc-Actuator
351003C700
Q: How to disconnect and remove the throttle body on Kia Sedona?
A:
Disconnect the cable from the negative battery terminal. Remove the air intake duct. For 2005 and earlier models, disconnect the electrical connectors from the Throttle Position Sensor (TPS) and Idle Speed Control (ISC) motor. For 2006 and later models, disconnect the wiring from the throttle control motor by removing the throttle body-to-support bracket bolt, followed by the throttle body mounting bolts. If applicable, disconnect the vacuum hoses from the throttle body and clamp off the coolant hoses to minimize coolant loss. Remove the throttle body mounting fasteners and take off the throttle body, ensuring to remove the throttle body support bracket bolt at the base for 2006 and later models. Disconnect the coolant hoses from the throttle body, pinching off the two hoses prior to detaching them to avoid spillage. Remove and discard the old throttle body gasket, then clean the gasket mating surfaces. Installation is the reverse of removal; use a new gasket and tighten the throttle body mounting bolts to the specified torque, checking the coolant level and adding as necessary.