What precautions should be taken when working inside door openings, and How to address the door latch,lock cylinder and handle assembly on Kia Sorento?

Wear gloves when working inside the door openings to protect against cuts from sharp metal edges. To address the door latch, first raise the window, then remove the door trim panel and water shield. Working through the large access hole, disengage the rods from the handle and lock cylinder, noting that all door lock rods are attached by plastic clips that can be unsnapped and pulled out. Disconnect the electrical connectors at the latch and disengage the handle-to-latch cable. Remove the screws securing the latch to the door and take out the latch assembly through the door opening, with installation being the reverse of removal. For the outside handle and door lock cylinder, raise the window and remove the door trim panel and water shield, taking care not to scratch the paint on the outside of the door by using wide masking tape around the handle opening. Remove the trim cap for the outside handle retaining screw and take out the screw. Through the access hole, disengage the plastic clips securing the outside door lock-to-latch rod and the outside door handle-to-latch rod. For 2009 and earlier models, remove the handle and lock cylinder retaining screws from inside the door, while for 2011 and later models, remove the retaining screws from inside the door and then, from the outside, remove the cover from the front of the handle, pulling the handle outwards and towards the rear to disengage it from the handle reinforcement inside the door. Remove the exterior handle mounting screw and take out the handle and lock assembly from inside the door, with installation being the reverse of removal. For the inside door handle, remove the door trim panel. On 2009 and earlier models, take out the handle retaining screws and nut, then disengage the handle from the door, followed by disengaging the handle-to-latch cable. For 2011 and later models, the inside door handle is attached to the door panel; depress the locking hook from the rear of the handle, unclip the cable handle cage, disconnect the cables, and remove the inside door handle fasteners and handle from the door panel, with installation being the reverse of removal.

Genuine Kia Sorento Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

115 Door Handles found

View related parts
Kia Sorento Door Outside Handle Assembly, Right
Part Number: 82661C5010
$34.47 MSRP: $46.33
You Save: $11.86 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside,Rh; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Door Outside Handle Assembly, Left
Part Number: 82651C5010
$34.43 MSRP: $46.28
You Save: $11.85 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside,Lh; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Door Outside Handle Assembly, Left
Part Number: 82651C5710
$80.80 MSRP: $108.60
You Save: $27.80 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside,Lh; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Rear Left Side Door Handle
Part Number: 826512P010
$88.06 MSRP: $118.37
You Save: $30.31 (26%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside; Handle, Outside
- Position: Rear Driver Side
- Replaces: 826521U020, 836621U010, 836651U000, 826511U010, 836521U010, 826521U030
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Door Outside Handle Assembly, Right
Part Number: 82661C5710
$80.80 MSRP: $108.60
You Save: $27.80 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside,Rh; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Door Outside Handle Assembly, Right
Part Number: 826603E070
$64.62 MSRP: $86.85
You Save: $22.23 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Front Door Outside,Rh
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | 3.3L - Lambda, 3.8L - Lambda | Wagon - 5Door 5P
View related parts
Kia Sorento Tail Gate Grip Handle
Part Number: 817563E001VA
$18.31 MSRP: $24.45
You Save: $6.14 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip Handle-Tail Gate; Grip Handle
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Door Inside Handle Assembly, Left
Part Number: 826101U000
$31.47 MSRP: $42.30
You Save: $10.83 (26%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Front Door Inside,Lh; Handle, Inside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2012 Kia Sorento | 2.4L - Theta 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Rear Door Outside Handle Assembly, Right
Part Number: 836603E040
$61.50 MSRP: $82.67
You Save: $21.17 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Rear Door Outside,Rh; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Front Door Outside Handle Assembly, Right
Part Number: 826603E010XX
$54.18 MSRP: $72.82
You Save: $18.64 (26%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Front Door Outside,Rh; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Liftgate Tailgate Hatch-Grip Pull Handle Trim
Part Number: 81756C5000WK
$12.19 MSRP: $16.28
You Save: $4.09 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip Assembly-Tail Gate Trim; Grip Handle
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Outer Front Right Handle And Cover
Part Number: 826511U010
$88.06 MSRP: $118.37
You Save: $30.31 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside
- Position: Front Outer Passenger Side
- Replaced by: 826512P010
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Door Outside Handle Assembly
Part Number: 826512P710
$119.52 MSRP: $159.62
You Save: $40.10 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Outside; Handle, Outside
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2012 Kia Sorento | 2.4L - Theta 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Rear Door Outside Handle
Part Number: 83661S9000
$41.79 MSRP: $56.17
You Save: $14.38 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Rear Door Out; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Tail Gate Trim Grip Assembly
Part Number: 817543E001WK
$32.74 MSRP: $44.00
You Save: $11.26 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grip Assembly-Tail Gate Trim; Grip Handle
- Manufacturer Note: INT;WK
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Inside Door Handle Assembly, Right
Part Number: 82620C6000SA1
$43.50 MSRP: $58.47
You Save: $14.97 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Door Inside,Rh; Handle, Inside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Rear Door Outside Handle
Part Number: 83651S9000
$41.79 MSRP: $56.17
You Save: $14.38 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle-Rear Door Out; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Door Outside Handle Assembly, Left
Part Number: 826503E040
Product Specifications
- Other Name: Handle Assembly-Front Door Outside,Lh; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Rear Door Outside Handle Assembly, Left
Part Number: 836503E040
Product Specifications
- Other Name: Handle Assembly-Rear Door Outside,Lh; Handle, Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Front Door Outside Handle Assembly, Right
Part Number: 826603E040
Product Specifications
- Other Name: Handle Assembly-Front Door Outside,Rh; Handle, Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P

| Page 1 of 6 |Next >

1-20 of 115 Results

Kia Sorento Door Handle

If you're in search of top-notch, reasonably priced OEM Kia Sorento Door Handle, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Door Handle, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Door Handle Parts Questions & Experts Answers

Rear Left Side Door Handle
826512P010
Q: What precautions should be taken when working inside door openings, and How to address the door latch,lock cylinder and handle assembly on Kia Sorento?
A: Wear gloves when working inside the door openings to protect against cuts from sharp metal edges. To address the door latch, first raise the window, then remove the door trim panel and water shield. Working through the large access hole, disengage the rods from the handle and lock cylinder, noting that all door lock rods are attached by plastic clips that can be unsnapped and pulled out. Disconnect the electrical connectors at the latch and disengage the handle-to-latch cable. Remove the screws securing the latch to the door and take out the latch assembly through the door opening, with installation being the reverse of removal. For the outside handle and door lock cylinder, raise the window and remove the door trim panel and water shield, taking care not to scratch the paint on the outside of the door by using wide masking tape around the handle opening. Remove the trim cap for the outside handle retaining screw and take out the screw. Through the access hole, disengage the plastic clips securing the outside door lock-to-latch rod and the outside door handle-to-latch rod. For 2009 and earlier models, remove the handle and lock cylinder retaining screws from inside the door, while for 2011 and later models, remove the retaining screws from inside the door and then, from the outside, remove the cover from the front of the handle, pulling the handle outwards and towards the rear to disengage it from the handle reinforcement inside the door. Remove the exterior handle mounting screw and take out the handle and lock assembly from inside the door, with installation being the reverse of removal. For the inside door handle, remove the door trim panel. On 2009 and earlier models, take out the handle retaining screws and nut, then disengage the handle from the door, followed by disengaging the handle-to-latch cable. For 2011 and later models, the inside door handle is attached to the door panel; depress the locking hook from the rear of the handle, unclip the cable handle cage, disconnect the cables, and remove the inside door handle fasteners and handle from the door panel, with installation being the reverse of removal.