Where is the CKP sensor located for Kia Spectra?

In 1996 and 1997 models, the CKP sensor is found at the front edge of the timing belt cover next to the crankshaft pulley. To replace it, lift up the front of the vehicle and secure it on jackstands. Disconnect electrical connector from CKP sensor. Unbolt CKP sensor's mounting bolt and remove sensor. Installation is a reverse of removal, don't forget to tighten CKP sensor mounting bolt tightly. For 1998 models onwards, CKP sensor is located at flywheel/driveplate area which is adjacent to the front part of transaxle bellhousing. Look for CKP sensor at transaxle bellhousing's front then trace its electrical lead up to connector that can be seen on small bracket situated on left side end of cylinder head; after that disconnect plug-in for CKP sensor itself. For you to unplug this connection (CKP Sensor Electrical Connector) in 1998 models onwards, just depress this wire retainer with your thumb and pull off connector. Remove mounting bolt for CKP sensor again while removing it as well. Installation is a reversal of removal; please ensure you lighten CKP sensor mounting bolt securely enough.

Genuine Kia Spectra Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Position Sensors found

View related parts
Kia Spectra Crankshaft Position Sensor
Part Number: 3918023500
$70.83 MSRP: $96.77
You Save: $25.94 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position
- Replaced by: 3918023910
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2009 Kia Spectra | High Grade, Middle Grade | 2.0L, 2.0L - Beta | 4 Door Sedan, 5 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Spectra Crank Angle Sensor
Part Number: 391902Y891
$36.31 MSRP: $52.40
You Save: $16.09 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Angle; Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2004 Kia Spectra | Low Grade, Middle Grade | 1.8L | 4 Door Sedan, 5 Door Sedan
View related parts
Kia Spectra Crankshaft Position Sensor
Part Number: 3918023910
$67.06 MSRP: $96.77
You Save: $29.71 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Replaces: 3918023500
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2009 Kia Spectra | High Grade, Middle Grade | 2.0L, 2.0L - Beta | 4 Door Sedan, 5 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Spectra Crank Angle Sensor
Part Number: 0K2A618891
Product Specifications
- Other Name: Sensor-Crankshaft Angle; Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2004 Kia Spectra | Low Grade, Middle Grade | 1.8L | 5 Door Sedan
View related parts
Kia Spectra Wheel Crankshaft Position Sensor
Part Number: 3919023500
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Spectra | High Grade, Middle Grade | 2.0L | 4 Door Sedan, 5 Door Sedan
View related parts
Kia Spectra Wheel Crankshaft Position Sensor
Part Number: 3919023020
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2007-2009 Kia Spectra | 2.0L - Beta | Sedan - 4Door 5P

Kia Spectra Crankshaft Position Sensor

The Kia Spectra Crankshaft Position Sensor is responsible for monitoring the angle and speed of the crankshaft so that the ECU can initiate the spark and fuel at the appropriate time to provide reliable power. In modern Kia powertrains, the unit mounts via the flywheel or pulley and converts rotation to electrical pulses that are read by the computer to determine ignition, injection, and variable valve timing. A sound Crankshaft Position Sensor works with the cam sensor so that the engine fires up fast, and a failed Crankshaft Position Sensor can result in a Kia stalling or refusing to start when hot. Over the years, Spectra models have employed inductive and Hall Effect designs. The inductive Crankshaft Position Sensor generates its own voltage using a toothed wheel and shrugs off dirt but has a loss of accuracy at very low rpm. The Hall Effect Crankshaft Position Sensor provides a sharp digital signal starting from zero rpm but requires constant power and tight sealing. Installing a new Crankshaft Position Sensor quickly revives an aging Kia and restores clean acceleration in the Spectra lineup, keeping every Spectra eager off the line.

If you're in search of top-notch, reasonably priced OEM Kia Spectra Crankshaft Position Sensor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Spectra Crankshaft Position Sensor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Spectra Crankshaft Position Sensor Parts Questions & Experts Answers

Crank Angle Sensor
391902Y891
Q: Where is the CKP sensor located for Kia Spectra?
A:
In 1996 and 1997 models, the CKP sensor is found at the front edge of the timing belt cover next to the crankshaft pulley. To replace it, lift up the front of the vehicle and secure it on jackstands. Disconnect electrical connector from CKP sensor. Unbolt CKP sensor's mounting bolt and remove sensor. Installation is a reverse of removal, don't forget to tighten CKP sensor mounting bolt tightly. For 1998 models onwards, CKP sensor is located at flywheel/driveplate area which is adjacent to the front part of transaxle bellhousing. Look for CKP sensor at transaxle bellhousing's front then trace its electrical lead up to connector that can be seen on small bracket situated on left side end of cylinder head; after that disconnect plug-in for CKP sensor itself. For you to unplug this connection (CKP Sensor Electrical Connector) in 1998 models onwards, just depress this wire retainer with your thumb and pull off connector. Remove mounting bolt for CKP sensor again while removing it as well. Installation is a reversal of removal; please ensure you lighten CKP sensor mounting bolt securely enough.