×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- Kia Parts
- Kia Accessories
My Garage
My Account
Cart
Genuine Kia Spectra Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Hood Cables found
Kia Spectra Hood Latch Cable Assembly
Part Number: 811902F000$24.23 MSRP: $34.67You Save: $10.44 (31%)Ships in 1-3 Business Days
Kia Spectra Hood Latch Cable Assembly
Part Number: 811902F100$28.80 MSRP: $41.20You Save: $12.40 (31%)Ships in 1-3 Business Days
Kia Spectra Hood Cable
The Kia Spectra Hood Cable is a simple but crucial connection that allows drivers to quickly pop the hood to check their engine and make needed repairs. Running from the cabin release handle to the latch assembly underneath the sheet metal, the Hood Cable converts a quick pull on the lever to a precise pull on the latch so the hood springs up for easy lifting. For every Kia Spectra, the mechanism consists of a primary Hood Cable that extends from the interior handle to a junction, with secondary strands extending from the junction to each of the latches, ensuring that both catch points release simultaneously. Years of heat, road debris, and water intrusion can crack the outer sheath and allow moisture in, causing the inner wire of the Hood Cable to fray or stretch, thus leaving the hood stuck in a shut position. Both early and later versions of the Spectra use this same pull wire layout, with only the adjustment of lengths to accommodate changes in body size and where latches are attached, so function and replacement steps remain almost the same. Regular checks for rough movement or visible damage help keep the Hood Cable working smoothly, sparing the owners of every Kia Spectra the frustration of a jammed hood and guarding the engine compartment from unnecessary exposure.
If you're in search of top-notch, reasonably priced OEM Kia Spectra Hood Cable, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Spectra Hood Cable, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.
Kia Spectra Hood Cable Parts Questions & Experts Answers
- Q: How to remove and install the Hood Cable and Hood Latch on the Kia Spectra?A:Before you start working, start by removing the radiator grille cover (if there is one) and unscrew the bolts that hold and connect the latch. Lift the latch release cable housing off the latch, then separate the cable from its connected slot in the latch mechanism. To put in a new cable, cut it off from the latch mechanism, then unhook it from any holders on the radiator support. To replace the cable, put a wire or string by the cable end of the latch, make the left front wheel loose and free, raise your car on jackstand securely, and take off the wheel. Unbolt and pull out the left inner Fender splash shield from its holding place. In the vehicle's interior, take off the leash handle from the below trim on the left side by removing the hood release cable nut and disconnecting the cable. Insert the passenger compartment side of the cable through the grommet, run it back to where you started, make sure there's a new grommet attached, then remove the old cable and attach it to the new one. Push the wire through your body, make sure it slides under the fender's rubber clips on its way, and put everything back together, checking that the grommet fits well inside the body.
