How to replace the Spool Valve of the CWT system on Kia Sportage?

The CWT system enhances fuel consumption and decreases the amount of nitrogen oxide (NOx) released into the atmosphere through continuously changing intake camshaft phase and, as a result, valve overlap possibilities. In response to shifting operating conditions, the CWT system varies intake valve timing incessantly. The Camshaft Position (CMP) sensor, oil temperature sensor, other sensors, Powertrain Control Module (PCM), oil control valve and CWT assembly itself located on the end of the exhaust camshaft make up the CWT system. The PCM processes this information by taking inputs from several sources such as: Oil Pressure/Temperature; Engines camshafts & crankshafts position; Vehicle speed etc. It then uses this processed information to send signals to open or close an OCV command may be sent by itself in response to some input. Home mechanics are not trained to diagnose faults in the control of VCT systems. However there are components that you can replace at home. Component replacement procedure for CWT assembly is provided in 2A below: The procedure for replacing OCV and its filter is contained herein below: Elsewhere in this guide are procedures for replacing various other sensors. It is situated on top left corner of cylinder head next to intake manifold . Take off engine cover. Unplug electrical connector from OCV.Remove bolt retaining OCV and extract it.Then install what you have removed vice versa.Oil control valves filter is underneath oil control valve threaded into left side of cylinder head.Take off engine cover.Unscrew OCV filter.Remove old gasket of old oil control valves installation is similar with removal.Ensure use of OCV filter gasket with secure tightening.Be sure that your engine does cool before doing it.This sensor sits below oil control valve at front engine.Put rags under sensor where any spillage may occur.Disconnect wiring from it then remove.Use wrench only on hex flats of sensor so as not spoil its shape.Fit it back the way you remove.

Genuine Kia Sportage Spool Valve

VTEC Solenoid

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Spool Valves found

View related parts
Kia Sportage Oil Flow Control Valve
Part Number: 243752G500
$147.17 MSRP: $214.22
You Save: $67.05 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Flow Control Valve-Exhaust; Control Valve Solenoid, Valve Assembly
- Replaces: 221002G520, 416Z42GH00
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Oil Flow Control
Part Number: 243552G000
$99.36 MSRP: $143.38
You Save: $44.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Flow Control Valve-Int; Valve Assembly
- Replaces: 243552G600, 243552G610, 2435525000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Oil Flow Control Valve
Part Number: 243552G500
$99.36 MSRP: $143.38
You Save: $44.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Flow Control Valve-Int
- Replaces: 221002G521, 420Y42GH00, 221002G700
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Oil Flow Control Valve
Part Number: 243752G200
$153.98 MSRP: $224.13
You Save: $70.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Flow Control Valve-Exhaust; Valve Assembly
- Replaces: 243752G600, 243752G610, 243752G100
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Oil Control Valve As
Part Number: 2435523770
$190.56 MSRP: $264.67
You Save: $74.11 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Control Valve Assembly
- Replaced by: 2435523800
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Sportage | 2.0L - Beta | Wagon - 5Door 5P
View related parts
Kia Sportage Oil Control Valve As
Part Number: 2435523763
$190.56 MSRP: $264.67
You Save: $74.11 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Control Valve Assembly
- Replaced by: 2435523800
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Oil Control Valve
Part Number: 2435523800
$181.83 MSRP: $264.67
You Save: $82.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Control Valve Assembly
- Replaces: 2435523763, 2435523770, 24355237632
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage SOLENOID-CVVT, Ex
Part Number: 243572M000
$103.57 MSRP: $149.45
You Save: $45.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II | Wagon - Long 5Door 5P

Kia Sportage Spool Valve

Kia Sportage Spool Valve is one of the useful parts that can greatly increase the power and durability of Kia Sportage cars. As being efficient the Spool Valve helps in providing the variable timing solenoid which in-turn helps the engine to offer flexibility in alterations of valve timing. It fine-tunes the combustion process hence increases the fuel efficiency and thus the performance of the engine which is very vital for a car model like the Kia Sportage that has been manufactured in so many models for the many years. The Spool Valve is universal for all the variants of Sportage, which makes it possible for the drivers to benefit from improved efficiency and safety. This mooring is significant in the automotive market due to its solid construction and use of high-quality materials to make the Kia Sportage Spool Valve an instrument in the establishment of the vehicle's reliability. Notably, the Spool Valve is as important as other aspects that make the Kia Sportage safer car to drive through different road conditions while on the road sensor/meter facilitates the control of the engine in different conditions of driving. Other features of the Spool Valve include flexibility that is required when managing the engine loads; all these work to make the driving more enjoyable. Thus, the further development of the Kia Sportage model is unthinkable without the constant presence of the Spool Valve, which helps to achieve the necessary level of performance and reliability for buyers Kia, SUV segment leader.

If you're in search of top-notch, reasonably priced OEM Kia Sportage Spool Valve, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Spool Valve, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Spool Valve Parts Questions & Experts Answers

Oil Flow Control
243552G000
Q: How to replace the Spool Valve of the CWT system on Kia Sportage?
A:
The CWT system enhances fuel consumption and decreases the amount of nitrogen oxide (NOx) released into the atmosphere through continuously changing intake camshaft phase and, as a result, valve overlap possibilities. In response to shifting operating conditions, the CWT system varies intake valve timing incessantly. The Camshaft Position (CMP) sensor, oil temperature sensor, other sensors, Powertrain Control Module (PCM), oil control valve and CWT assembly itself located on the end of the exhaust camshaft make up the CWT system. The PCM processes this information by taking inputs from several sources such as: Oil Pressure/Temperature; Engines camshafts & crankshafts position; Vehicle speed etc. It then uses this processed information to send signals to open or close an OCV command may be sent by itself in response to some input. Home mechanics are not trained to diagnose faults in the control of VCT systems. However there are components that you can replace at home. Component replacement procedure for CWT assembly is provided in 2A below: The procedure for replacing OCV and its filter is contained herein below: Elsewhere in this guide are procedures for replacing various other sensors. It is situated on top left corner of cylinder head next to intake manifold . Take off engine cover. Unplug electrical connector from OCV.Remove bolt retaining OCV and extract it.Then install what you have removed vice versa.Oil control valves filter is underneath oil control valve threaded into left side of cylinder head.Take off engine cover.Unscrew OCV filter.Remove old gasket of old oil control valves installation is similar with removal.Ensure use of OCV filter gasket with secure tightening.Be sure that your engine does cool before doing it.This sensor sits below oil control valve at front engine.Put rags under sensor where any spillage may occur.Disconnect wiring from it then remove.Use wrench only on hex flats of sensor so as not spoil its shape.Fit it back the way you remove.