How do you remove and install the front fender on Kia Optima?

Starting with the models manufactured between 200 and 2006, start by unbolt the front wheel lug nuts, lift the car, use jackstands to support it and then, take off the front wheel. Subsequently, unbolt the head light housing, then separate the front bumper cover from the fender as well as unbolt the wheel well splash shield to clear it away. Disconnect the front bumper and take out two screws that are at the front of the fender and a single bolt that connects the fender to the body at the rear side under the wheel well. Pull this bolt by opening the door on the rear side, and pull the fender as well as the bolts which are on the hood. Safely remove the fender in this case by gently pulling at the fender with the possible help of an assistant so as not to pull of other body parts. To remove the fender, it is advisable to reverse the following: Before tightening the fasteners, align the fender with the hood and front edge of the door. Thus, despite the fact that the location, number, and type of fasteners differ for models 2006.5 and later, the removal of the front fender is similar to the removal described above.

Genuine Kia Optima Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Fenders found

View related parts
Kia Optima Panel-Fender RH
Part Number: 663212T000
$206.40 MSRP: $300.44
You Save: $94.04 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,RH; Fender
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender LH
Part Number: 663112T000
$234.96 MSRP: $344.12
You Save: $109.16 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,LH; Fender
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender,RH
Part Number: 66321D4000
$192.50 MSRP: $267.37
You Save: $74.87 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaced by: 66321D4000A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA, 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender,LH
Part Number: 66311D4000
$183.68 MSRP: $267.37
You Save: $83.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Replaced by: 66311D4000A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA, 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender LH
Part Number: 663112G100
$199.04 MSRP: $289.72
You Save: $90.68 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,LH; Fender
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF, 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender LH
Part Number: 663112G500
$201.99 MSRP: $294.02
You Save: $92.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,LH; Fender
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2010 Kia Optima | 2.4L - Theta 2, 2.7L - MU | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender,RH
Part Number: 663213C300
$213.42 MSRP: $310.65
You Save: $97.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender
- Position: Passenger Side
- Replaces: 663213C310
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L, 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima Panel-Fender RH
Part Number: 663212G100
$227.81 MSRP: $331.60
You Save: $103.79 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,RH; Fender
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF, 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender RH
Part Number: 663212G500
$201.99 MSRP: $294.02
You Save: $92.03 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel-Fender,RH; Fender
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2010 Kia Optima | 2.4L - Theta 2, 2.7L - MU | Sedan - 4Door 5P
View related parts
Kia Optima Panel-Fender,LH
Part Number: 663113C300
Product Specifications
- Other Name: Fender
- Position: Driver Side
- Replaces: 663113C310
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L, 2.5L, 2.7L | 4 Door Sedan

Kia Optima Fender

The Kia Optima Fender protects the sleek sedan from mud, stones, and splashing water so that the body remains refined and road users remain safe. Positioned around each wheel well, the Fender on every Kia creates a hard barrier that stops debris the moment tires throw it up, preventing chips, dents, rust, and corrosive battery acid from scarring the paint. Each new generation of Optima may have a slightly flared Fender lip or a sharper edge to the wheel arch, but the mission remains the same. The design has continued stamped steel on Kia sedans for a tight fit and smooth alignment with Optima body lines, though early rounded contours are distinct from the later sharper styling cues. Regardless of model year, all Fenders suffer from snow, salt, and road grit, and an exposed Fender portion is susceptible to rusting. Owners change panels if they are affected by holes or warping that jeopardize legality or safety. Factory units retain original looks, but their steep cost is often shocking to Kia fans, highlighting the importance of the Fender to the Optima identity.

If you're in search of top-notch, reasonably priced OEM Kia Optima Fender, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Optima Fender, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Optima Fender Parts Questions & Experts Answers

Panel-Fender RH
663212G100
Q: How do you remove and install the front fender on Kia Optima?
A:
Starting with the models manufactured between 200 and 2006, start by unbolt the front wheel lug nuts, lift the car, use jackstands to support it and then, take off the front wheel. Subsequently, unbolt the head light housing, then separate the front Bumper cover from the fender as well as unbolt the wheel well splash shield to clear it away. Disconnect the front bumper and take out two screws that are at the front of the fender and a single bolt that connects the fender to the body at the rear side under the wheel well. Pull this bolt by opening the door on the rear side, and pull the fender as well as the bolts which are on the hood. Safely remove the fender in this case by gently pulling at the fender with the possible help of an assistant so as not to pull of other body parts. To remove the fender, it is advisable to reverse the following: Before tightening the fasteners, align the fender with the hood and front edge of the door. Thus, despite the fact that the location, number, and type of fasteners differ for models 2006.5 and later, the removal of the front fender is similar to the removal described above.