How do you replace and adjust the brake light switch on Kia Sedona?

The brake light switch is located on a bracket at the top of the brake pedal; loosen the locknut and unscrew the switch from its bracket. Disconnect the electrical connector from the switch, then loosen the locknut and unscrew the switch from the pedal bracket. Installation is the reverse of removal. Check and, if necessary, adjust brake pedal height. Loosen the switch locknut, adjust the switch so that the plunger protrusion is within the specified range, and then tighten the locknut. Plug the electrical connector into the switch, ensuring the brake lights come on when the brake pedal is depressed and go off when released; repeat the adjustment procedure if the brake lights do not function properly. Check and, if necessary, adjust brake pedal freeplay.

Genuine Kia Sedona Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Light Switches found

View related parts
Kia Sedona Stop Lamp Switch Assembly(4P)
Part Number: 938103K000
$11.79 MSRP: $16.87
You Save: $5.08 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp(4P); Stoplamp Switch
- Replaces: 9381038110, 938101C800, 9381038100, 938102H000, 938103K000QQK
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Stop Lamp Switch Assembly(4P)
Part Number: 938103S700
$19.74 MSRP: $28.23
You Save: $8.49 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp(4P); Stoplamp Switch
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2018 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Stop Lamp Switch Assembly(4P)
Part Number: 0K20C66490A
$15.08 MSRP: $20.43
You Save: $5.35 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp(4P)
- Manufacturer Note: W/ACC
- Replaced by: 938103E000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Stop Lamp Switch Assembly
Part Number: 93810G8100
$57.42 MSRP: $82.85
You Save: $25.43 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lam; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2019-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P

Kia Sedona Brake Light Switch

The Kia Sedona Brake Light Switch protects everyone on the road by instantly lighting the rear stop lamps whenever your foot meets the pedal. Mounted underneath the dashboard on a bracket aligned with the brake pedal arm, this Brake Light Switch uses a simple plunger style contact to complete the electrical circuit the moment the brake pedal moves, thus providing the following drivers of a van with a clear signal that the van is slowing down. In all the Sedona model years, Kia applied a system with the same design of direct contact, rather than pressure sensors or pedal-mounted modules, meaning that owners will see one simple layout of the Brake Light Switch when checking the wiring or pedal hardware. The switch connects to the rear bulbs via the lighting harness of the vehicle, sharing circuits with other lighting components described in the system overview, but the Brake Light Switch is controlled independently of both headlights and fog lights. In actual practice, a faulty unit can cause the Sedona to go without brake lights or keep them on, so Kia specifies precise adjustment of the tiny gap between the pedal arm and plunger to keep engagement perfect. Regularly checking the Brake Light Switch function keeps all Kia Sedonas visible at every stop, keeping your safety miles after mile ahead.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Brake Light Switch, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Brake Light Switch, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch Assembly(4P)
938103K000
Q: How do you replace and adjust the brake light switch on Kia Sedona?
A:
The brake light switch is located on a bracket at the top of the brake pedal; loosen the locknut and unscrew the switch from its bracket. Disconnect the electrical connector from the switch, then loosen the locknut and unscrew the switch from the pedal bracket. Installation is the reverse of removal. Check and, if necessary, adjust brake pedal height. Loosen the switch locknut, adjust the switch so that the plunger protrusion is within the specified range, and then tighten the locknut. Plug the electrical connector into the switch, ensuring the brake lights come on when the brake pedal is depressed and go off when released; repeat the adjustment procedure if the brake lights do not function properly. Check and, if necessary, adjust brake pedal freeplay.