×
- Live Chat
- 1-888-958-2959
My Garage
My Account
Cart
Genuine Kia Sedona Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
13 Brake Master Cylinders found
Kia Sedona Booster & Master Cylinder
Part Number: 585004D500$552.70 MSRP: $780.65You Save: $227.95 (30%)Ships in 1-3 Business Days
Kia Sedona Cylinder Assembly-Brake
Part Number: 58510A9300$216.22 MSRP: $295.87You Save: $79.65 (27%)Kia Sedona Booster & Master Cylinder
Part Number: 585004D550$564.46 MSRP: $797.27You Save: $232.81 (30%)Ships in 1-3 Business Days
Kia Sedona Cylinder Assembly-Tandem Mast
Part Number: 1K52Y43400$205.87 MSRP: $281.70You Save: $75.83 (27%)Ships in 1-3 Business Days
Kia Sedona Cylinder Assembly-Brake
Part Number: 585104D550$216.22 MSRP: $295.87You Save: $79.65 (27%)Ships in 1-3 Business Days
Kia Sedona Cylinder Assembly-Brake
Part Number: 585104D500$219.96 MSRP: $300.99You Save: $81.03 (27%)Ships in 1-3 Business DaysKia Sedona Cylinder Assembly-Tandem Mast
Part Number: 1K52Y43400A$224.16 MSRP: $306.74You Save: $82.58 (27%)Ships in 1-3 Business DaysKia Sedona Cylinder Assembly-Tandem Mast
Part Number: 0K52Y43400$255.44 MSRP: $355.37You Save: $99.93 (29%)Ships in 1-3 Business DaysKia Sedona Booster & Master Cylinder
Part Number: 585004D501$433.07 MSRP: $602.49You Save: $169.42 (29%)Ships in 1-3 Business DaysKia Sedona Booster & Master Cylinder
Part Number: 585004D551$439.56 MSRP: $611.52You Save: $171.96 (29%)Ships in 1-3 Business DaysKia Sedona Cylinder Assembly-Tandem Mast
Part Number: 0K52Y43400A$210.20 MSRP: $287.64You Save: $77.44 (27%)Ships in 1-3 Business Days
Kia Sedona Tank Assembly-Reserve
Part Number: 0K52Y43550$47.58 MSRP: $63.95You Save: $16.37 (26%)Ships in 1-3 Business Days
Kia Sedona Tank Assembly-Reserve
Part Number: 0K52Y43550A$47.58 MSRP: $63.95You Save: $16.37 (26%)Ships in 1-3 Business Days
Kia Sedona Brake Master Cylinder
If you're in search of top-notch, reasonably priced OEM Kia Sedona Brake Master Cylinder, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Brake Master Cylinder, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.
Kia Sedona Brake Master Cylinder Parts Questions & Experts Answers
- Q: How can brake fluid damage paint, and what precautions should be taken during the master cylinder replacement process on Kia Sedona?A: Brake fluid can quickly damage paint, so it's important to cover all body parts and avoid spills during the following procedures. Immediately wipe up any spilled fluid and flush the area with water. The Brake Master Cylinder is located in the engine compartment, mounted to the power brake booster. For models from 2005 or earlier, remove the battery; for 2006 or later, remove the air filter housing. With the engine off, pump the brake pedal several times to relieve the vacuum reserve in the power brake booster, preventing contaminants from entering when the cylinder is removed. Use a syringe to remove and properly dispose of the brake fluid from the Brake Master Cylinder reservoir, then disconnect the brake fluid level switch connector and move the harness aside. Place rags under the fluid fittings and prepare caps or plastic bags for the ends of the lines after disconnection. Loosen the fittings at the brake lines entering the Brake Master Cylinder, pull the lines slightly away, and quickly plug the ends to avoid contamination. Clean the area where the Brake Master Cylinder mounts, remove the nuts attaching it to the power booster, and carefully pull the Brake Master Cylinder out, avoiding fluid spills. If needed, remove the reservoir mounting screw and transfer the old reservoir to the new Brake Master Cylinder, ensuring new seals are installed. Before installation, bench bleed the new Brake Master Cylinder by clamping it in a vise and attaching bleeder tubes to the outlet ports. Fill the reservoir with the recommended brake fluid and slowly push the pistons into the Brake Master Cylinder to expel air into the reservoir. Repeat until no air bubbles are present, then remove the bleed tubes and install plugs in the open ports, followed by the reservoir cap. Install a new vacuum seal on the Brake Master Cylinder where it meets the power booster, then mount the Brake Master Cylinder over the studs and tighten the nuts finger tight. Carefully thread the brake line fittings into the Brake Master Cylinder, ensuring not to strip the threads, then fully tighten the mounting nuts and brake line fittings to the specified torque. Fill the Brake Master Cylinder reservoir with fluid and bleed the Brake Master Cylinder and brake system by having an assistant depress the brake pedal while loosening the fitting to allow air and fluid to escape, repeating until the fluid is clear of air bubbles. Have plenty of rags on hand to catch any fluid, as brake fluid can ruin painted surfaces, and rinse the area under the Brake Master Cylinder thoroughly with clean water after bleeding. Finally, test the operation of the brake system carefully before returning the vehicle to normal service.
Related Kia Sedona Parts
Browse by Year
2021 Brake Master Cylinder 2020 Brake Master Cylinder 2019 Brake Master Cylinder 2018 Brake Master Cylinder 2017 Brake Master Cylinder 2016 Brake Master Cylinder 2015 Brake Master Cylinder 2014 Brake Master Cylinder 2013 Brake Master Cylinder 2012 Brake Master Cylinder 2011 Brake Master Cylinder 2010 Brake Master Cylinder 2009 Brake Master Cylinder 2008 Brake Master Cylinder 2007 Brake Master Cylinder 2006 Brake Master Cylinder 2005 Brake Master Cylinder 2004 Brake Master Cylinder 2003 Brake Master Cylinder 2002 Brake Master Cylinder 2001 Brake Master Cylinder