How do you remove the latch and hood release cable from the Kia Sedona?

To remove the latch, first take out the radiator support trim panel fasteners and the panel if present. For models from 2006 and later, remove the plastic fasteners and cover of the hood latch trim. Next, unscrew the bolts securing the hood latch to the radiator support and detach the latch assembly. After that, detach the hood release cable and remove the latch from the radiator support, with installation being the reverse of removal. For the cable, release the cable end and slide the cable case end sideways in the keyhole slot of the hood latch while pinching the barb on the cable case closed, then remove the cable from the latch. For models from 2005 and earlier, in the passenger compartment, remove the screws to detach the hood release cable and handle assembly from the instrument panel. For models from 2006 and later, in the passenger compartment, remove the center screw on the release handle, slide the handle off, remove the kick panel, and detach the hood release cable and handle assembly, also detaching the cable end from the hood release handle. Under the dash, remove the rubber cable insulator from the hole in the dash panel. Connect a string or wire to the engine compartment end of the cable, detach the cable, and pull it through the firewall into the passenger compartment. Then, connect the string or wire to the new cable and pull it through the firewall into the engine compartment, with the remainder of installation being the reverse of removal.

Genuine Kia Sedona Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Cables found

View related parts
Kia Sedona Hood Latch Cable Assembly
Part Number: 811904D000
$22.58 MSRP: $32.30
You Save: $9.72 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Hood Latch Cable Assembly
Part Number: 81190A9100
$22.26 MSRP: $31.85
You Save: $9.59 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Hood Latch Cable Assembly
Part Number: 81190A9000
$28.36 MSRP: $40.57
You Save: $12.21 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Cable Assembly-Hood LATC
Part Number: 81190A9050
$28.36 MSRP: $40.57
You Save: $12.21 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2019-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Wire-BONNET Release
Part Number: 0K55256720A
Product Specifications
- Other Name: Wire Assembly-Release; Release Cable
- Replaces: 0K52Y56720
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7

Kia Sedona Hood Cable

Kia Sedona Hood Cable allows drivers to quickly and safely pop the hood and connects the in-cabin release lever to the twin latch system that holds the hood in place for safe driving. Over the years, this humble part has remained fairly consistent with the various Kia minivans, and it has been a primary lead from the cabin handle to a junction under the hood and then secondary leads from there to each latch, so that each new generation of Sedona depends on the same, old pull and release motion. Moisture, cracks, and stretching are the normal enemies, and once damage has occurred, the Hood Cable may refuse to unlatch, so timely replacement is required to restore normal access for regular checks. No other electronic or hydraulic styles have emerged, which means the mechanical Hood Cable is the only style for Kia owners, except for varying lengths and mounting points that correspond to specific Sedona model years. Regular inspection of the Hood Cable on any Kia Sedona prevents unexpected latch failures, and a frayed Hood Cable feels loose at the lever.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Hood Cable, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Hood Cable, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Hood Cable Parts Questions & Experts Answers

Hood Latch Cable Assembly
811904D000
Q: How do you remove the latch and hood release cable from the Kia Sedona?
A:
To remove the latch, first take out the radiator support trim panel fasteners and the panel if present. For models from 2006 and later, remove the plastic fasteners and cover of the hood latch trim. Next, unscrew the bolts securing the hood latch to the radiator support and detach the latch assembly. After that, detach the hood release cable and remove the latch from the radiator support, with installation being the reverse of removal. For the cable, release the cable end and slide the cable case end sideways in the keyhole slot of the hood latch while pinching the barb on the cable case closed, then remove the cable from the latch. For models from 2005 and earlier, in the passenger compartment, remove the screws to detach the hood release cable and handle assembly from the instrument panel. For models from 2006 and later, in the passenger compartment, remove the center screw on the release handle, slide the handle off, remove the kick panel, and detach the hood release cable and handle assembly, also detaching the cable end from the hood release handle. Under the dash, remove the rubber cable insulator from the hole in the dash panel. Connect a string or wire to the engine compartment end of the cable, detach the cable, and pull it through the firewall into the passenger compartment. Then, connect the string or wire to the new cable and pull it through the firewall into the engine compartment, with the remainder of installation being the reverse of removal.