How to remove and install the steering column on Kia Sedona?

To remove the steering column, park the vehicle with the wheels straight ahead and disconnect the cable from the negative terminal of the battery. Next, remove the steering wheel and the steering column covers along with the lower knee bolster. Disconnect all electrical connectors from the large harness on the side of the steering column and any ground wires attached to the opposite side. For 2005 and earlier models, disconnect the brake transmission shift interlock cable from the steering column if equipped. Mark the relationship of the intermediate shaft to the steering column coupler, then remove the pinch bolt and separate the intermediate shaft by compressing it. Remove the steering column mounting fasteners, carefully lower the column ensuring nothing is still connected, and take it out. For installation, guide the steering column into position, install and tighten the mounting fasteners, connect the steering column coupler to the intermediate shaft, and install the pinch bolt and nut, tightening it appropriately. Finally, reconnect the negative battery cable.

Genuine Kia Sedona Steering Column

Steering Column Tilt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Columns found

View related parts
Kia Sedona Steering Column Assembly
Part Number: 56310A9000
$326.46 MSRP: $478.12
You Save: $151.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly-Steering; Steering Column
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Steering Column Assembly
Part Number: 56310A9020
$334.30 MSRP: $489.60
You Save: $155.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly-Steering; Column Assembly, Steering Column
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Steering Column Assembly
Part Number: 563104D000
$575.14 MSRP: $822.80
You Save: $247.66 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly-Steering
- Replaced by: 563104D200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Steering Column Assembly
Part Number: 563104D200
$557.86 MSRP: $822.80
You Save: $264.94 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly-Steering; Column Assembly, Steering Column
- Replaces: 563104D000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Upper Tilt Assembly
Part Number: 0K52Y32100A
$334.61 MSRP: $490.05
You Save: $155.44 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly, Steering Column
- Position: Upper
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Upper Tilt Assembly
Part Number: 0K52Y32100C
$364.48 MSRP: $533.80
You Save: $169.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly, Steering Column
- Position: Upper
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Steering Column Assembly
Part Number: 563104D001
$495.78 MSRP: $731.23
You Save: $235.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly-Steering; Column Assembly, Steering Column
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P

Kia Sedona Steering Column

The Kia Sedona Steering Column provides accurate control of road operations by connecting the wheel with the steering gear, transmitting all the angles and torque to the tires. Beyond this basic job, the Steering Column in each Kia van holds a collapsible shaft that folds in the event of a crash, a theft-deterring steering lock that is tied to the ignition, and brackets for multi-function switches and wiring, while Steering Column updates and modern improvements make the Steering Column much safer and more comfortable. First generation versions of Sedona applied the straightforward collapsible tube, with later versions of the Sedona using additional universal joints with easy tilt or telescopic adjustment, but the pathway of the Steering Column remained the same. All assemblies comply with federal safety rules, and each Steering Column design is based on the concept of a tolerance ring which grips the inner shaft firmly under normal force but allows the column to slide in the event of impact loads being increased, absorbing energy to protect the driver. Grinding noises, rough turning, or a wheel that will not center are signs that there is trouble, and Kia owners should have problems fixed as soon as possible to keep their Sedona steering true, and they will be able to enjoy the dependable Kia driving feel.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Steering Column, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Steering Column, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Steering Column Parts Questions & Experts Answers

Upper Tilt Assembly
0K52Y32100A
Q: How to remove and install the steering column on Kia Sedona?
A:
To remove the steering column, park the vehicle with the wheels straight ahead and disconnect the cable from the negative terminal of the battery. Next, remove the Steering Wheel and the steering column covers along with the lower knee bolster. Disconnect all electrical connectors from the large harness on the side of the steering column and any ground wires attached to the opposite side. For 2005 and earlier models, disconnect the brake transmission shift interlock cable from the steering column if equipped. Mark the relationship of the intermediate shaft to the steering column coupler, then remove the pinch bolt and separate the intermediate shaft by compressing it. Remove the steering column mounting fasteners, carefully lower the column ensuring nothing is still connected, and take it out. For installation, guide the steering column into position, install and tighten the mounting fasteners, connect the steering column coupler to the intermediate shaft, and install the pinch bolt and nut, tightening it appropriately. Finally, reconnect the negative battery cable.