What precautions should be taken when working inside door openings, and how should the Door Handle, Door Latch Assembly and Door Lock Cylinder be addressed on Kia Sorento?

Wear gloves when working inside the door openings to protect against cuts from sharp metal edges. To address the door latch, first raise the window, then remove the door trim panel and water shield. Working through the large access hole, disengage the rods from the handle and lock cylinder, noting that all door lock rods are attached by plastic clips that can be unsnapped and pulled out. Disconnect the electrical connectors at the latch and disengage the handle-to-latch cable. Remove the screws securing the latch to the door and take out the latch assembly through the door opening, with installation being the reverse of removal. For the outside handle and door lock cylinder, raise the window and remove the door trim panel and water shield, taking care not to scratch the paint on the outside of the door by using wide masking tape around the handle opening. Remove the trim cap for the outside handle retaining screw and take out the screw. Through the access hole, disengage the plastic clips securing the outside door lock-to-latch rod and the outside door handle-to-latch rod. For 2009 and earlier models, remove the handle and lock cylinder retaining screws from inside the door, while for 2011 and later models, remove the retaining screws from inside the door and then, from the outside, remove the cover from the front of the handle, pulling the handle outwards and towards the rear to disengage it from the handle reinforcement inside the door. Remove the exterior handle mounting screw and take out the handle and lock assembly from inside the door, with installation being the reverse of removal. For the inside door handle, remove the door trim panel. On 2009 and earlier models, take out the handle retaining screws and nut, then disengage the handle from the door, followed by disengaging the handle-to-latch cable. For 2011 and later models, the inside door handle is attached to the door panel; depress the locking hook from the rear of the handle, unclip the cable handle cage, disconnect the cables, and remove the inside door handle fasteners and handle from the door panel, with installation being the reverse of removal.

Genuine Kia Sorento Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Door Lock Cylinders found

View related parts
Kia Sorento Door Key Sub Set Left
Part Number: 81970C5A00
$86.64 MSRP: $125.02
You Save: $38.38 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,LH; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Back Door Key Sub Set
Part Number: 812503ED00
$64.88 MSRP: $93.62
You Save: $28.74 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Lock Cylinder, Lock Cylinder Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Tailgate-Lock Cylinder
Part Number: 812503EB00
$66.15 MSRP: $95.45
You Save: $29.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Lock Cylinder, Lock Cylinder Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Key Sub Set-Door,LH
Part Number: 81970R5A00
$59.71 MSRP: $86.17
You Save: $26.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento KEY SUB SET-DOOR,LH
Part Number: 81970R5B00
$67.34 MSRP: $92.00
You Save: $24.66 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Key Sub Set-Door,LH
Part Number: 81970P2A00
$109.99 MSRP: $158.72
You Save: $48.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P
View related parts
Kia Sorento Front Door-Lock Cylinder
Part Number: 819803EC00
Product Specifications
- Other Name: Key Sub Set-Door,Rh; Lock Cylinder, Lock Cylinder Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Door Key Sub Set Left
Part Number: 819703ED00
Product Specifications
- Other Name: Key Sub Set-Door,LH
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | 3.3L - Lambda, 3.8L - Lambda | Wagon - 5Door 5P
View related parts
Kia Sorento Door Key Sub Set Left
Part Number: 819703EB00
Product Specifications
- Other Name: Key Sub Set-Door,LH; Lock Cylinder, Lock Cylinder Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Front Door Key Sub Set, Left
Part Number: 819703EA00
Product Specifications
- Other Name: Key Sub Set-Door,LH; Lock Cylinder, Lock Cylinder Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Door Key Sub Set, Right
Part Number: 819803EA10
Product Specifications
- Other Name: Key Sub Set-Door,Rh; Lock Cylinder, Lock Cylinder Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon

Kia Sorento Door Lock Cylinder

The Kia Sorento Door Lock Cylinder allows drivers to lock or unlock the cabin using a physical key in the front door, providing an easy safety backup in the event of electronics failure. This small metal barrel is lined up with its internal tumblers, matching the unique cuts on the key, and then slides a linked rod which either engages or disengages the latch, so the process of unlocking is smooth and predictable. Earlier Kia models of the Sorento applied the Door Lock Cylinder as its only mechanical component, while mid-generation models use the Door Lock Cylinder in tandem with remote fobs, and the recent trims sometimes conceal a single Door Lock Cylinder underneath a cap for emergency purposes when the battery dies. Regardless of the year, a worn Door Lock Cylinder will stick, resist turning, or require more force, giving warning that the cylinder should be replaced soon. Frequent locking cycles and grit exposure cause rapid wear, and if ignored, the key can bend or snap, stranding the Sorento. The process of selecting an original Kia part restores the crisp click that owners are accustomed to, as the fresh Door Lock Cylinder matches perfectly with the factory cut key, with no fuss keeping every Kia safe and allowing the Sorento to stay secure.

If you're in search of top-notch, reasonably priced OEM Kia Sorento Door Lock Cylinder, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Door Lock Cylinder, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Door Lock Cylinder Parts Questions & Experts Answers

Door Key Sub Set Left
819703EB00
Q: What precautions should be taken when working inside door openings, and how should the Door Handle, Door Latch Assembly and Door Lock Cylinder be addressed on Kia Sorento?
A:
Wear gloves when working inside the door openings to protect against cuts from sharp metal edges. To address the door latch, first raise the window, then remove the door trim panel and water shield. Working through the large access hole, disengage the rods from the handle and lock cylinder, noting that all door lock rods are attached by plastic clips that can be unsnapped and pulled out. Disconnect the electrical connectors at the latch and disengage the handle-to-latch cable. Remove the screws securing the latch to the door and take out the latch assembly through the door opening, with installation being the reverse of removal. For the outside handle and door lock cylinder, raise the window and remove the door trim panel and water shield, taking care not to scratch the paint on the outside of the door by using wide masking tape around the handle opening. Remove the trim cap for the outside handle retaining screw and take out the screw. Through the access hole, disengage the plastic clips securing the outside door lock-to-latch rod and the outside door handle-to-latch rod. For 2009 and earlier models, remove the handle and lock cylinder retaining screws from inside the door, while for 2011 and later models, remove the retaining screws from inside the door and then, from the outside, remove the cover from the front of the handle, pulling the handle outwards and towards the rear to disengage it from the handle reinforcement inside the door. Remove the exterior handle mounting screw and take out the handle and lock assembly from inside the door, with installation being the reverse of removal. For the inside door handle, remove the door trim panel. On 2009 and earlier models, take out the handle retaining screws and nut, then disengage the handle from the door, followed by disengaging the handle-to-latch cable. For 2011 and later models, the inside door handle is attached to the door panel; depress the locking hook from the rear of the handle, unclip the cable handle cage, disconnect the cables, and remove the inside door handle fasteners and handle from the door panel, with installation being the reverse of removal.

Related Kia Sorento Parts

Browse by Year

2023 Door Lock Cylinder 2022 Door Lock Cylinder 2021 Door Lock Cylinder 2020 Door Lock Cylinder 2019 Door Lock Cylinder 2018 Door Lock Cylinder 2017 Door Lock Cylinder 2016 Door Lock Cylinder 2015 Door Lock Cylinder 2008 Door Lock Cylinder 2007 Door Lock Cylinder 2006 Door Lock Cylinder 2005 Door Lock Cylinder 2004 Door Lock Cylinder 2003 Door Lock Cylinder