How do I remove and install a blower motor and Blower Motor Resistor in a Kia Sedona?

Remove the cable connecting the negative terminal of the battery from the vehicle. Lift the rear console to access the blower motor area and disconnect the blower motor's fasteners and cover if they exist or pull the insulation down at the rear glove box. Remove the electrical connectors that are related to the blower motor power. Note: Cars with self-regulating temperature system employ a power module rather than a blower motor resistor. Both are mounted and joined in similar way. Take off the mounting fasteners and pull the unit out of the heater/air conditioning housing. Removal is the exact opposite of installation. The blower motor and the blower wheel are therefore from the manufacturer in harmony and are fitted only as a unit. The electrical connector of the blower motor should be disconnected. Retrieve the blower motor mounting bolts, then take out the blower motor. Removal is the process of dismantling a system while installation is the opposite of removal. Disconnect/reduce the rear heating and air conditioning housing. Note: All models made in 2006 and later equipped with Power Mosfet and not the blower motor resistor. Both are similar in how they are installed and interfaced. Take off the rear quarter panel trim, and unplug the connector to the blower motor resistor/Mosfet. Take out the mounting fasteners and pull out the unit away from the heater/air conditioning housing. This involves the process opposite to the removal, it involves placing the plant and equipment back at their initial positions. The blower motor and the blower wheel are assembled together at the time of manufacturing and should only be replaced together. Take off the connector that provides power to the blower motor. Take off all the screws that hold the blower motor at the back of the housing. Take off the blower motor from the housing you have identified. Removal: Installation is the exact opposite of removal.

Genuine Kia Sedona Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Blower Motors found

View related parts
Kia Sedona Motor & Fan Assembly-A/C
Part Number: 971132B005
$143.92 MSRP: $209.48
You Save: $65.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor & Fan Assembly-Air Conditioner Blower; Blower Motor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2018 Kia Sedona | 3.3L - Lambda 2, 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Long - 8P, Wagon Short - 7P
View related parts
Kia Sedona Motor-Fan
Part Number: 1K55261C07A
$188.66 MSRP: $262.03
You Save: $73.37 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor Assembly
- Replaced by: 1K55261C07C
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Motor & Wheel Assembly
Part Number: 97113A9000
$292.35 MSRP: $428.17
You Save: $135.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Blower Unit
Part Number: 97100A9000
$370.21 MSRP: $542.20
You Save: $171.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Blower Unit
Part Number: 97100A9100
$364.74 MSRP: $534.18
You Save: $169.44 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Motor Assembly-Blower
Part Number: 979454D001
$179.85 MSRP: $261.78
You Save: $81.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Replaces: 979454D000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Blower Unit
Part Number: 972004D100
$673.56 MSRP: $993.45
You Save: $319.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Motor Assembly-Blower
Part Number: 979454D000
$188.48 MSRP: $261.78
You Save: $73.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 979454D001
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Motor-Fan
Part Number: 1K55261C07C
$180.02 MSRP: $262.03
You Save: $82.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower; Blower Motor
- Replaces: 1K55261C07, 1K55261C07A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Motor Assembly-Blower, Rear
Part Number: 1K55261R07
$198.18 MSRP: $288.47
You Save: $90.29 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower,Rear; Blower Motor
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2001-2005 Kia Sedona | Low Grade, Middle Grade | 3.5L | Wagon Short 7
View related parts
Kia Sedona Blower Unit
Part Number: 972004D102
$653.33 MSRP: $963.62
You Save: $310.29 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Assembly
- Replaces: 972004D200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Blower Unit
Part Number: 972004D200
$673.57 MSRP: $963.62
You Save: $290.05 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 972004D102
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Blower Unit
Part Number: 972004D202
$370.69 MSRP: $521.37
You Save: $150.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 972004D212
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Blower Unit
Part Number: 972004D212
$370.69 MSRP: $521.37
You Save: $150.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 972004D202
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Motor & Fan Assembly-A/C
Part Number: 97113A9010
$197.75 MSRP: $287.85
You Save: $90.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Motor Assembly-Blower
Part Number: 971144D000
Product Specifications
- Other Name: Blower Motor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7

Kia Sedona Blower Motor

The Kia Sedona Blower Motor forces heated or cooled air through the cabin fan, allowing passengers to quickly control the temperature and make the windows visible. The part is part of the HVAC system that connects familiar dashboard knobs to an electronic control module, wiring, and fan such that when the driver chooses the setting, the Blower Motor will immediately increase or decrease airflow. Early Kia Sedona minivans were equipped with a single front unit, but in later versions of the Kia Sedona minivan, the spacious cabin necessitated the inclusion of a second rear Blower Motor, resulting in dual-zone comfort. Regardless of layout, every Blower Motor relies on a circuit-board module that can electronically fail or different physical switches that can break, and so heat and AC can be stuck and unresponsive. If a wire loosens or the module shorts, the vents can fall silent or even lock on high, a sure indication that the system needs attention. Keeping the controls responsive allows all Kia rides to handle icy dawns and scorching afternoons, making the last Sedona mile feel as good as the first, assuming the Blower Motor is in good shape.

If you're in search of top-notch, reasonably priced OEM Kia Sedona Blower Motor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Blower Motor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Blower Motor Parts Questions & Experts Answers

Motor Assembly-Blower
971144D000
Q: How do I remove and install a blower motor and Blower Motor Resistor in a Kia Sedona?
A:
Remove the cable connecting the negative terminal of the battery from the vehicle. Lift the rear console to access the blower motor area and disconnect the blower motor's fasteners and cover if they exist or pull the insulation down at the rear glove box. Remove the electrical connectors that are related to the blower motor power. Note: Cars with self-regulating temperature system employ a power module rather than a blower motor resistor. Both are mounted and joined in similar way. Take off the mounting fasteners and pull the unit out of the heater/air conditioning housing. Removal is the exact opposite of installation. The blower motor and the blower wheel are therefore from the manufacturer in harmony and are fitted only as a unit. The electrical connector of the blower motor should be disconnected. Retrieve the blower motor mounting bolts, then take out the blower motor. Removal is the process of dismantling a system while installation is the opposite of removal. Disconnect/reduce the rear heating and air conditioning housing. Note: All models made in 2006 and later equipped with Power Mosfet and not the blower motor resistor. Both are similar in how they are installed and interfaced. Take off the rear quarter panel trim, and unplug the connector to the blower motor resistor/Mosfet. Take out the mounting fasteners and pull out the unit away from the heater/air conditioning housing. This involves the process opposite to the removal, it involves placing the plant and equipment back at their initial positions. The blower motor and the blower wheel are assembled together at the time of manufacturing and should only be replaced together. Take off the connector that provides power to the blower motor. Take off all the screws that hold the blower motor at the back of the housing. Take off the blower motor from the housing you have identified. Removal: Installation is the exact opposite of removal.