How do you disconnect and remove the Canister Purge Valve,Vapor Canister and Vapor Pressure Sensor from a Kia Sorento?

Disconnect the cable from the negative terminal of the battery. Remove the engine cover, if applicable, then disconnect the electrical connector and vacuum hoses from the purge valve. Remove the purge valve mounting fasteners and take out the purge valve, with installation being the reverse of removal. Raise the rear of the vehicle and support it securely on jackstands, then remove the protective cover from the EVAP canister assembly, if equipped. The two-way valve is located in the line between the fuel tank and the canister; disconnect the EVAP hoses from it, ensuring correct installation direction indicated by the arrow on the valve. The EVAP canister is mounted to the frame rail near the fuel tank; disconnect the hoses and wiring from the canister closed valve, then remove the EVAP canister mounting bracket bolts to take out the canister and bracket as a single assembly, with installation being the reverse of removal. The vapor pressure sensor is mounted to the rear end of the fuel tank in the line connecting the fuel tank and the canister; disconnect the wiring harness and fuel hoses, then remove the sensor along with its mounting bracket, which can be detached from the sensor after it is out of the vehicle, with installation being the reverse of removal. Finally, disconnect the wiring connector from the canister closed valve and remove the valve from the canister, with installation being the reverse of removal.

Genuine Kia Sorento Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Canister Purge Valves found

View related parts
Kia Sorento Purge Control Valve
Part Number: 289103C200
$70.74 MSRP: $102.08
You Save: $31.34 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Valve-PURGE Control; Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2020 Kia Sorento | 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Purge Control Valve
Part Number: 2891025100
$57.75 MSRP: $83.33
You Save: $25.58 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-PURGE Control; Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Canister Close Purge Solenoid Valve
Part Number: 3143029200
$84.07 MSRP: $121.32
You Save: $37.25 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Canister Close
- Replaces: 0K07A18741
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Canister Close Valve
Part Number: 314533Q500
$87.10 MSRP: $125.68
You Save: $38.58 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Canister Close; Relief Valve, Vacuum Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2018 Kia Sorento | 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Vapor Canister Purge Solenoid Control Valve
Part Number: 289103C100
$69.52 MSRP: $100.32
You Save: $30.80 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-PURGE Control; Purge Control Valve, Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Vic Solenoid Valve
Part Number: 394613C500
$122.81 MSRP: $170.57
You Save: $47.76 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-Vic Solenoid
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2012 Kia Sorento | 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Purge Control Valve
Part Number: 289103L135
$58.75 MSRP: $84.78
You Save: $26.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-PURGE Control; Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2019-2020 Kia Sorento | 3.3L - Lambda 2 | Wagon - 5Door 7P
View related parts
Kia Sorento Purge Control Valve Assembly
Part Number: 289002GGA2
$76.66 MSRP: $104.73
You Save: $28.07 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly-Purge Control
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2018 Kia Sorento | 2.4L - Theta 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Purge Control Valve
Part Number: 289102S000
$91.13 MSRP: $131.50
You Save: $40.37 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve-PURGE Control; Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Valve-PURGE Control
Part Number: 289102M442
$57.90 MSRP: $83.55
You Save: $25.65 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Purge Solenoid, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P
View related parts
Kia Sorento Valve-Canister Close
Part Number: 31453AA000
$70.03 MSRP: $101.05
You Save: $31.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Relief Valve, Valve, Vent Control Solenoid
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Canister Close Valve
Part Number: 314300W000
$195.88 MSRP: $285.12
You Save: $89.24 (32%)
Product Specifications
- Other Name: Valve-Canister Close; Check Valve, Relief Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Canister Close Valve
Part Number: 314302F700
Product Specifications
- Other Name: Valve-Canister Close; Pressure Relief Valve, Purge Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Vic Solenoid Valve
Part Number: 394613C400
$122.64 MSRP: $178.52
You Save: $55.88 (32%)
Product Specifications
- Other Name: Control Solenoid, Solenoid Valve
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2013-2020 Kia Sorento | 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P

Kia Sorento Canister Purge Valve

The Kia Sorento Canister Purge Valve traps fuel vapors and measures them into the intake to burn them instead of leaking them to keep emissions down and the check engine light off. Located between the charcoal canister and manifold, the Canister Purge Valve opens when the engine vacuum and the control module signal align, pulling fresh air through activated charcoal so that stored hydrocarbons are mixed with the air fuel charge. Early Sorento generations were equipped with a simple vacuum actuated Canister Purge Valve, whereas the later models of Sorento feature an electronically controlled Canister Purge Valve which is cycled by the engine computer for precise flow and onboard leak testing with the help of a vent solenoid and tank pressure sensor. This newer valve has a faster reaction, tighter sealing, and supports stricter Kia emission standards, making every Kia Sorento a cleaner car and keeping Kia drivers compliant, all thanks to the reliable Canister Purge Valve.

If you're in search of top-notch, reasonably priced OEM Kia Sorento Canister Purge Valve, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Canister Purge Valve, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Canister Purge Valve Parts Questions & Experts Answers

Canister Close Valve
314300W000
Q: How do you disconnect and remove the Canister Purge Valve,Vapor Canister and Vapor Pressure Sensor from a Kia Sorento?
A:
Disconnect the cable from the negative terminal of the battery. Remove the engine cover, if applicable, then disconnect the electrical connector and vacuum hoses from the purge valve. Remove the purge valve mounting fasteners and take out the purge valve, with installation being the reverse of removal. Raise the rear of the vehicle and support it securely on jackstands, then remove the protective cover from the EVAP canister assembly, if equipped. The two-way valve is located in the line between the fuel tank and the canister; disconnect the EVAP hoses from it, ensuring correct installation direction indicated by the arrow on the valve. The EVAP canister is mounted to the frame rail near the fuel tank; disconnect the hoses and wiring from the canister closed valve, then remove the EVAP canister mounting bracket bolts to take out the canister and bracket as a single assembly, with installation being the reverse of removal. The vapor pressure sensor is mounted to the rear end of the fuel tank in the line connecting the fuel tank and the canister; disconnect the wiring harness and fuel hoses, then remove the sensor along with its mounting bracket, which can be detached from the sensor after it is out of the vehicle, with installation being the reverse of removal. Finally, disconnect the wiring connector from the canister closed valve and remove the valve from the canister, with installation being the reverse of removal.