How to remove and install the instrument cluster on Kia Sorento?

Disconnect the cable from the negative battery terminal. Remove the instrument cluster bezel. To detach the instrument cluster, remove the cluster mounting screws (2009 and earlier model shown, later models similar) and pull the instrument cluster towards the steering wheel. Disconnect the electrical connectors from the rear of the cluster and remove the instrument cluster. Installation is the reverse of removal.

What challenges do home mechanics face when removing the Instrument Cluster, and what steps should they take to ensure successful reassembly on Kia Optima?

It becomes fairly burdensome for home mechanics because there are concealed screws for instance those at the back of a hub, tight angles, and lots of electrical connections, which require tagging and removal. It will therefore be preferable if this is left in the hand of competent do-it-yourselfers. Since there are many parts in an instrument panel, one has to note down how every of it is removed, where it is located in relation to the other parts, and how it is fitted. It is not required but to increase the available space and to help avoid possible harm both front seats can be unbolted. First, isolate the negative terminal of the battery, and if possible, you should unhinged the front seats for adequate space. Continue to the removal of the steering wheel, multi-function switch assembly, dash panel, central console, heater and air control, audio unit, instrument cluster and the glove box. Pull the passenger side airbag electrical connector off, unbolt the driver's knee bolster by removing its two bolts, unfasten the two bolts that fix the steering column to the instrument panel and finally, pry both the A-pillar trim panels and kick panels off. Remove several ones of the electrical connectors, and make sure to label all the uncertain ones for identification. Unbolt all the connections that attach the instrument panel to the body and then swing the former forward and pull the instrument panel away from the windshield for withdrawal via the car door, with some support. Another complicated task, which requires insertion of more electrical connectors and fasteners, is the removal of the support beam; this should be done only when one needs to get to the heating/air conditioning unit. Installation process is done in a sequence opposite to removal process.

How to remove and install the instrument cluster on Kia Sportage?

Remove the instrument cluster bezel. Detach the instrument cluster from the dash by removing the four mounting screws. Pull out the cluster and disconnect the electrical connectors from the backside by accessing it and removing the connectors. Installation is the reverse of removal.

Genuine Kia Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

818 Instrument Clusters found

View related parts
Kia Instrument Cluster Assembly
Part Number: 940092K380
$538.65 MSRP: $794.47
You Save: $255.82 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Soul | 2012-2013 | 2.0L - NU
View related parts
Kia Instrument Cluster Assembly
Part Number: 94001Q5200
$470.75 MSRP: $694.32
You Save: $223.57 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-INSTRUM; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Seltos | 2021-2023 | 1.6L - GAMMA, 2.0L - NU
View related parts
Kia Instrument Cluster Assembly
Part Number: 940011G233
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Gauge Cluster, Instrument Cluster
Fits the following Kia Models:
- Rio | 2006-2011 | 1.6L - Alpha DOHC
View related parts
Kia Instrument Cluster Assembly
Part Number: 940013W016
$952.05 MSRP: $1362.02
You Save: $409.97 (31%)
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
Fits the following Kia Models:
- Sportage | 2010-2013 | 2.4L - Theta 2
View related parts
Kia Instrument Cluster Assembly
Part Number: 940114D080
$499.51 MSRP: $736.73
You Save: $237.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument(Kilometer Per Hour); Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Sedona | 2006-2014 | 3.5L - Lambda 2
View related parts
Kia Instrument Cluster Assembly
Part Number: 940211F511
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Sportage | 2006-2010 | 2.7L - Delta
View related parts
Kia Instrument Cluster Assembly
Part Number: 940011F043
$524.69 MSRP: $773.88
You Save: $249.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Sportage | 2006-2010 | 2.7L - Delta
View related parts
Kia Instrument Cluster Assembly
Part Number: 940011U000
$691.71 MSRP: $1020.22
You Save: $328.51 (33%)
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Instrument Cluster
Fits the following Kia Models:
- Sorento | 2009-2012 | 3.5L - Lambda 2
View related parts
Kia Instrument Cluster Assembly
Part Number: 940013W017
$900.73 MSRP: $1328.52
You Save: $427.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly
Fits the following Kia Models:
- Sportage | 2010-2013 | 2.4L - Theta 2
View related parts
Kia Instrument Cluster Assembly
Part Number: 940013W015
$958.59 MSRP: $1413.85
You Save: $455.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Sportage | 2010-2013 | 2.0L - Theta 2, 2.4L - Theta 2
View related parts
Kia Cluster
Part Number: 940114C952
$1468.98 MSRP: $2166.63
You Save: $697.65 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly
Fits the following Kia Models:
- Optima | 2011-2013 | 2.0L - Theta 2
View related parts
Kia Instrument Cluster Assembly
Part Number: 940013F450
$687.09 MSRP: $982.97
You Save: $295.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument
Fits the following Kia Models:
- Amanti | 2004-2006 | Low Grade, Middle Grade | 3.5L
View related parts
Kia Instrument Cluster Assembly
Part Number: 94011L3410
$1721.50 MSRP: $2462.80
You Save: $741.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CLUSTER ASSY-INSTRUM
Fits the following Kia Models:
- K5 | 2021-2024 | 1.6L-Gamma-II, 2.5L-THETA-III
View related parts
Kia Instrument Cluster Assembly
Part Number: 94001K0100
$705.69 MSRP: $1040.83
You Save: $335.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-INSTRUM; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Soul | 2020-2022 | 1.6L - GAMMA, 2.0L - NU
View related parts
Kia Instrument Cluster Assembly
Part Number: 94006B2720
$728.70 MSRP: $1074.78
You Save: $346.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-Instrument; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Soul | 2017-2019 | 1.6L - GAMMA, 2.0L - NU
View related parts
Kia Instrument Cluster Assembly
Part Number: 94001K0520
$745.48 MSRP: $1099.53
You Save: $354.05 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cluster Assembly-INSTRUM; Cluster Assembly, Instrument Cluster
Fits the following Kia Models:
- Soul | 2020-2022 | 1.6L - GAMMA, 2.0L - NU
View related parts
Kia Instrument Cluster Assembly
Part Number: 940112F000
$461.73 MSRP: $681.02
You Save: $219.29 (33%)
Product Specifications
- Other Name: Cluster Assembly-Instrument; Instrument Cluster
Fits the following Kia Models:
- Spectra | 2007-2009 | 2.0L - Beta
- Spectra SX | 2007-2009 | 2.0L - Beta
- Spectra5 SX | 2007-2009 | 2.0L - Beta
View More
View related parts
Kia Instrument Cluster Assembly
Part Number: 940012F210
Product Specifications
- Other Name: Cluster Assembly-Instrument
Fits the following Kia Models:
- Spectra | 2003-2006 | High Grade, Middle Grade | 2.0L
View related parts
Kia Instrument Cluster Assembly
Part Number: 940013E061
Product Specifications
- Other Name: Cluster Assembly-Instrument
Fits the following Kia Models:
- Sorento | 2003-2006 | High Grade, Middle Grade | 3.5L
View related parts
Kia Instrument Cluster Assembly
Part Number: 940112F010
Product Specifications
- Other Name: Cluster Assembly-Instrument; Instrument Cluster
Fits the following Kia Models:
- Spectra | 2007-2009 | 2.0L - Beta
- Spectra SX | 2007-2009 | 2.0L - Beta
- Spectra5 SX | 2007-2009 | 2.0L - Beta
View More

| Page 1 of 41 |Next >

1-20 of 818 Results

About Kia Instrument Cluster

For instrument cluster, the most accessible information is how fast you are driving now. Except this, of course, there are various gauges and indicators for drivers as a reference for their next decision. If the information in the instrument cluster is wrong or not showing, it can be dangerous for drivers. Basically, the instrument cluster provides drivers information about speed, distance, heat and fuel. What's more, the indicator light offers warning and updates, including check engine light and low fuel light. The location of the instrument cluster, apparently, is on the driver's side on the dashboard, in front of the steering wheel. As we mentioned, a failing instrument cluster can cause danger and damage to your car. If there's no more fuel in your KIA and the low fuel light doesn't lit, it causes damage to your engine if you still drive it. Check your instrument cluster and see if the replacement is necessary. We offer you all KIA genuine OEM instrument cluster at a discounted price.

Kia Instrument Cluster Parts Questions & Experts Answers

Instrument Cluster Assembly
940011U000
Q:
How to remove and install the instrument cluster on Kia Sorento?
Posted by Tonya G.
A:
Disconnect the cable from the negative battery terminal. Remove the instrument cluster bezel. To detach the instrument cluster, remove the cluster mounting screws (2009 and earlier model shown, later models similar) and pull the instrument cluster towards the steering wheel. Disconnect the electrical connectors from the rear of the cluster and remove the instrument cluster. Installation is the reverse of removal.
Answered by Kia Parts Specialist Nate / Jul 06, 2026
Instrument Cluster Assembly
940013C000
Q:
What challenges do home mechanics face when removing the Instrument Cluster, and what steps should they take to ensure successful reassembly on Kia Optima?
Posted by Santiago E.
A:
It becomes fairly burdensome for home mechanics because there are concealed screws for instance those at the back of a hub, tight angles, and lots of electrical connections, which require tagging and removal. It will therefore be preferable if this is left in the hand of competent do-it-yourselfers. Since there are many parts in an instrument panel, one has to note down how every of it is removed, where it is located in relation to the other parts, and how it is fitted. It is not required but to increase the available space and to help avoid possible harm both front seats can be unbolted. First, isolate the negative terminal of the battery, and if possible, you should unhinged the front seats for adequate space. Continue to the removal of the steering wheel, multi-function switch assembly, dash panel, central console, heater and air control, audio unit, instrument cluster and the glove box. Pull the passenger side airbag electrical connector off, unbolt the driver's knee bolster by removing its two bolts, unfasten the two bolts that fix the steering column to the instrument panel and finally, pry both the A-pillar trim panels and kick panels off. Remove several ones of the electrical connectors, and make sure to label all the uncertain ones for identification. Unbolt all the connections that attach the instrument panel to the body and then swing the former forward and pull the instrument panel away from the windshield for withdrawal via the car door, with some support. Another complicated task, which requires insertion of more electrical connectors and fasteners, is the removal of the support beam; this should be done only when one needs to get to the heating/air conditioning unit. Installation process is done in a sequence opposite to removal process.
Answered by Kia Parts Specialist Paul / Apr 13, 2025
Instrument Cluster Assembly
940013W015
Q:
How to remove and install the instrument cluster on Kia Sportage?
Posted by Dorothy B.
A:
Remove the instrument cluster bezel. Detach the instrument cluster from the dash by removing the four mounting screws. Pull out the cluster and disconnect the electrical connectors from the backside by accessing it and removing the connectors. Installation is the reverse of removal.
Answered by Kia Parts Specialist Jeff / Jun 13, 2022