How do you replace the hood latch and cable on Kia Optima?

To replace the latch, first remove the radiator guard or trim panel if necessary. Scribe a line around the latch for alignment, then take out the retaining bolts securing the hood latch to the radiator support and remove the latch. Disconnect the hood release cable from the latch. For installation, reverse the removal steps, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. To replace the cable, lift the hood release handle lever upward in the passenger compartment, pull down on the cable housing end to disengage it from the hood release lever handle, and attach a piece of thin wire or string to the end of the cable. Disconnect the hood release cable from the latch and remove the left inner plastic fender well. Unclip all cable retaining clips on the radiator support and outer fender well, then pull the cable forward into the wheel well until the wire or string is visible. Remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached, pull the wire or string back through the body until the new cable reaches the inside handle. Install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.

Genuine Kia Optima Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Hood Cables found

View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 81190D5200
$23.24 MSRP: $33.25
You Save: $10.01 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA, 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811904C000
$17.21 MSRP: $24.62
You Save: $7.41 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811904C100
$22.58 MSRP: $32.30
You Save: $9.72 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902T000
$18.92 MSRP: $27.07
You Save: $8.15 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902T100
$22.50 MSRP: $32.18
You Save: $9.68 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 81190D5000
$21.59 MSRP: $30.88
You Save: $9.29 (31%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA, 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902G100
$60.08 MSRP: $86.70
You Save: $26.62 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF, 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902G600
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2010 Kia Optima | 2.4L - Theta 2, 2.7L - MU | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811903C000
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L, 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902G000
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF, 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Cable Assembly
Part Number: 811902G500
$61.73 MSRP: $89.08
You Save: $27.35 (31%)
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2010 Kia Optima | 2.4L - Theta 2, 2.7L - MU | Sedan - 4Door 5P

Kia Optima Hood Cable

Kia Optima Hood Cable allows drivers to quickly pop the hood with a cable connecting the cabin release lever to the front latch to allow easy access for routine checks. This metal core line in a plastic sleeve leads to a junction block, then the branch cables lead to the twin latches, so one pull on the Hood Cable releases both points simultaneously. Early Kia models had a single continuous Hood Cable; the later versions of the Kia have a two-piece Hood Cable system for improved tension control and easy replacement, the only difference being the split at the junction which limits damage to one section. Whichever style your Optima bears, it's possible by neglect to allow moisture to seep on the inside causing cracks, stretch, or breakage, and a faulty Hood Cable stranding the Optima hood in the locked position makes timely swap vital for every Kia Optima owner.

If you're in search of top-notch, reasonably priced OEM Kia Optima Hood Cable, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Optima Hood Cable, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Optima Hood Cable Parts Questions & Experts Answers

Hood Latch Cable Assembly
811902G600
Q: How do you replace the hood latch and cable on Kia Optima?
A:
To replace the latch, first remove the radiator guard or trim panel if necessary. Scribe a line around the latch for alignment, then take out the retaining bolts securing the hood latch to the radiator support and remove the latch. Disconnect the hood release cable from the latch. For installation, reverse the removal steps, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. To replace the cable, lift the hood release handle lever upward in the passenger compartment, pull down on the cable housing end to disengage it from the hood release lever handle, and attach a piece of thin wire or string to the end of the cable. Disconnect the hood release cable from the latch and remove the left inner plastic fender well. Unclip all cable retaining clips on the radiator support and outer fender well, then pull the cable forward into the wheel well until the wire or string is visible. Remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached, pull the wire or string back through the body until the new cable reaches the inside handle. Install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.