How do you replace the hood latch and cable on Kia Optima?

To replace the latch, first remove the radiator guard or trim panel if necessary. Scribe a line around the latch for alignment, then take out the retaining bolts securing the hood latch to the radiator support and remove the latch. Disconnect the hood release cable from the latch. For installation, reverse the removal steps, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. To replace the cable, lift the hood release handle lever upward in the passenger compartment, pull down on the cable housing end to disengage it from the hood release lever handle, and attach a piece of thin wire or string to the end of the cable. Disconnect the hood release cable from the latch and remove the left inner plastic fender well. Unclip all cable retaining clips on the radiator support and outer fender well, then pull the cable forward into the wheel well until the wire or string is visible. Remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached, pull the wire or string back through the body until the new cable reaches the inside handle. Install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.

Genuine Kia Optima Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Latches found

View related parts
Kia Optima Hood Latch Assembly
Part Number: 811302T000
$39.65 MSRP: $57.22
You Save: $17.57 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2011-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Assembly
Part Number: 81130D5010
$84.56 MSRP: $122.02
You Save: $37.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA, 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Assembly
Part Number: 811302G000
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF, 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Assembly
Part Number: 811302G500
Product Specifications
- Other Name: Latch Assembly-Hood; Latch, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2010 Kia Optima | 2.4L - Theta 2, 2.7L - MU | Sedan - 4Door 5P
View related parts
Kia Optima Hood Latch Assembly
Part Number: 811303C500
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L, 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima Hood Latch Assembly
Part Number: 811303C000
Product Specifications
- Other Name: Latch Assembly-Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L, 2.5L, 2.7L | 4 Door Sedan

Kia Optima Hood Latch

Kia Optima Hood Latch is a tiny part, which represents the company and its vehicles, and their devotion to the clients by offering only the optimal. Kia Optima Hood Latch is located below the front end of the hood and plays an important role as it locks the hood from the inside and does not allow it to open while the car is being driven. This mechanism is essential for covering significant parts for example the engine, the radiator and the battery thus helping to make the efficient and safer. Originally compatible with models of Kia Optima, the Hood Latch has gone through its various revisions on different generation adaptions with the car models, with different designs and functions. This adaptability shows yet again that Kia is very keen on delivering high standards across their range. Arguably, the product that has gained much attention in the automobiles market is the Hood Latch since it is strong and easy to install, making the automobile long-lasting and durable. Also, the Hood Latch is made to be extremely durable to meet the needs of clients in various situations. On the safety aspects of the Kia Optima vehicle, the ever important Hood Latch aims to give drivers and passengers that extra reassurance. Being a functional and stylish component of the car that fits perfectly into the context of the Kia Optima, the Hood Latch helps improve the vehicle's performance and further solidify Kia's position as the maker of mid-size cars.

If you're in search of top-notch, reasonably priced OEM Kia Optima Hood Latch, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Optima Hood Latch, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Optima Hood Latch Parts Questions & Experts Answers

Hood Latch Assembly
811302G500
Q: How do you replace the hood latch and cable on Kia Optima?
A:
To replace the latch, first remove the radiator guard or trim panel if necessary. Scribe a line around the latch for alignment, then take out the retaining bolts securing the hood latch to the radiator support and remove the latch. Disconnect the hood release cable from the latch. For installation, reverse the removal steps, ensuring the latch is adjusted so the hood engages securely when closed and the hood bumpers are slightly compressed. To replace the cable, lift the hood release handle lever upward in the passenger compartment, pull down on the cable housing end to disengage it from the hood release lever handle, and attach a piece of thin wire or string to the end of the cable. Disconnect the hood release cable from the latch and remove the left inner plastic fender well. Unclip all cable retaining clips on the radiator support and outer fender well, then pull the cable forward into the wheel well until the wire or string is visible. Remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached, pull the wire or string back through the body until the new cable reaches the inside handle. Install the new cable into the hood release lever, ensuring the cable housing fits snugly into the notch in the handle bracket, and pull on the cable until the cable stop seats in the grommet on the body. Complete the installation by reversing the removal steps.